energy efficiency level 3 transformer manufacturers in india

energy efficiency level-3 specified in is 1180 (part-1) 2014 suppliers in africa, view level 3 energy efficiency transformer price in india

The IS 1180 (Part 1):2014 is an Outdoor Type Oil Immersed Distribution Transformer. These transformers go up to and Include a power value of about 2500 kVA, 33kV . This Specification, especially Part 1 covers Mineral Oil Immersed transformers

energy efficiency level 3 transformer manufacturers in india

 

 

energy efficiency level 3 transformer manufacturers in india
energy efficiency level 3 transformer manufacturers in india
is 1180 (part-1) 2014 energy efficiency level 3 transformer
IS 1180 (part-1) 2014 energy efficiency level 3 transformer
level-3 energy efficiency transformer
level-3 energy efficiency transformer

 

is 1180 energy efficiency level 3 transformer Exporter in india, we get level 3 certificate in energy efficiency for domestic heating

The IS 1180 (Part 1):2014  is a  revised ISS, which covers both sealed as well as non-sealed type distribution transformers with voltage of up to 2500 kVA. Further, the IS 1180 (Part 1):2014  also covers nominal system voltage up to and including 33 kV. Besides this the revision of the level 3 certificate in energy efficiency for domestic heating also covers single phase sealed type distribution transformer up to 25 kilo-volt-ampere rating and a nominal system voltage up to and including 33 kilo-volt-ampere.

Moreover, in this revised version i.e. IS 1180 (Part 1):2014 , the distribution transformers have been grouped under three different categories as follows – Energy Efficiency Level 1, Energy Efficiency Level 2 and Energy Efficiency Level 3. These levels have been categorised on basis of the maximum total loss.The energy efficiency level 3 transformer manufacturers in India have designed these transformers based on the Basic Insulation Level or referred to  in short as BIL consideration.

Accordingly, the other parameters will also be set for the energy efficiency level-3 specified in is 1180 (part-1) 2014 of a particular rating in order to achieve the desired performance as required by the end user. Hence, the existing guidelines have been reviewed and the following guidelines have been proposed for certification of Outdoor Type Distribution Transformers as per the standard IS 1180 (Part 1):2014 for those factories or for the energy efficiency level 3 transformer manufacturers in India .

 

is 1180 energy efficiency level 3 transformer specification

Ratings Three Phase – Upto 200 kVA
Applicable Standards IS 1180, IS 2026
Cooling ONAN
Insulating Fluid Mineral Oil as per IS:335
Frequency 50 Hz
Primary voltage Upto 11000 V
Secondary Voltage 433 V
Winding material Copper/Aluminium
Temperature Rise 35 C / 40 C
energy efficiency level 3 transformer manufacturers in india export to Africa, Nepal, Malaysia Tanzania, Malawi, Rwanda, Bangladesh, Nigeria, Kenya, India, Uganda

 

Principal Parameters

Sl.
No.

Item

Specification

1.

Continuous rated
capacity

5 KVA

10 KVA

16 KVA

25 KVA

63 KVA

100 KVA

200 KVA

500 KVA

2.

System voltage (max.)

12 kV (Line
to Line)

12 kV

12 kV

12 kV

12 kV

12 kV

12 kV

12 kV

3.

Rated voltage HV

11 kV

11 kV

11 kV

11 kV

11 kV

11 kV

11 kV

11 kV

4.

Rated voltage LV

250 V

433-250 V

433-250 V

433-250 V

433-250 V

433-250 V

433-250
V

433-250 V

5.

Line current HV

0.454 A

0.525 A

0.84 A

1.31 A

3.306 A

5.25 A

10.50 A

26.25 A

6.

Line current LV

20.0 A

13.3 A

21.33 A

33.33 A

84.0 A

133.0 A

266.0 A

665.0 A

7.

Frequency

50 c/s +/-
5%

50 c/s +/-
5%

50 c/s +/-
5%

50 c/s +/-
5%

50 c/s +/-
5%

50 c/s +/-
5%

50 c/s +/-
5%

50 c/s +/-
5%

8.

No. of Phases

Single

Three

Three

Three

Three

Three

Three

Three

9.

Connection HV

Single

Delta

Delta

Delta

Delta

Delta

Delta

Delta

10.

Connection LV

Individual

Star (Neutral brought
out)

Star (Neutral brought
out)

Star (Neutral brought
out)

Star (Neutral brought
out)

Star (Neutral brought
out)

Star (Neutral brought
out)

Star (Neutral brought
out)

11.

Vector group

Dyn-11

Dyn-11

Dyn-11

Dyn-11

Dyn-11

Dyn-11

Dyn-11

12.

Type of cooling

ONAN

ONAN

ONAN

ONAN

ONAN

ONAN

ONAN

ONAN

Sl.
No.

Item

Specification

13.

Tap                      changing arrangement

Not applicable

Not applicable

Not applicable

Not applicable

Not applicable

Not applicable

-7.5 % to
+10%     in
steps    of
2.5 %

-7.5 % to
+10%       in
steps of 2.5
%

14.

Noise   level   at           rated
voltage and frequency

48db

48 db

48 db

48 db

51db

51db

55 db

56 db

15.

Permissible temperature rise over ambient

  1. Of top oil measured by thermometer
  2. Of         winding

measuredby resistance

 

 

30Deg.C

35Deg.C

 

 

35 Deg.C

40 Deg.C

 

 

35 Deg.C

40 Deg.C

 

 

35 Deg.C

40 Deg.C

 

 

35 Deg.C

40 Deg.C

 

 

35 Deg.C

40 Deg.C

 

 

35 Deg.C

40 Deg.C

 

 

35Deg.C

40Deg.C

16

Minimum clearances in air of bushing terminals with connectors fitted in mm.

 

HV Phase to Phase

255

255

255

255

255

255

255

255

 

HV Phase to Earth

205

205

205

205

205

205

205

205

 

LV Phase to Phase

75

75

75

75

75

75

75

 

LV Phase/ Neutral                 to
Earth

75

55

55

55

55

55

55

55

17

Basic   Insulation          Level
(Minimum)

95 KV

95 KV

95 KV

95 KV

95 KV

95 KV

95 KV

95 KV

 

what is energy efficiency level 3 transformer ?

Within the past decades, greenhouse gas (GHG) outflows and their impacts on our planet have ended up the focus of many governments, offices, companies and individuals. Energy generation may be a major supporter to GHG emissions. In expansion to broad efforts to create energy generation more environmentally neighborly, bringing down energy utilization inside most mechanical and commercial offices moreover could be a objective. As a result, accomplishing expanded energy efficiency levels for electrical equipment, including transformers, has ended up a need for numerous industry participants.Star Rated Transformers are Energy Effective Distribution Transformers with Star Rating Name issued by Bureau of Energy Efficiency(BEE).

The significant Indian standard for distribution transformers (DTs) IS:1180/1989 has been changed within the year 2014 as IS:1180 (Part1)/2014 by Bureau of Indian Standard (BIS) subsequently superseding IS:1180 (Portion 1 and 2)/1989 both for fixed and non-sealed sort. This standard advance prescribes numerous reviewing with respect to vitality effectiveness, i.e. three energy-efficiency levels: level 1, level 2 and level 3 of transformers comparing to 3 star4 star and 5 star named transformers separately, as endorsed by BEE (moreover as per CEA required rules)

energy efficiency level 3 transformer manufacturers in india

energy efficiency level-3 transformer price

 For Final energy efficiency level-3 specified in is 1180 (part-1) 2014 transformer price Please Mail Us on info@rajasthanpower.in

 

A Full Range Of energy efficiency level-3 specified in is 1180 (part-1) 2014 manufacturers in india

 

level 3 Energy efficient transformer Technical Data

Star Rating Distribution Transformers with Energy efficiency level 3 as per IS 1180:2014 (Part I)

  • Maximum Ambient Temperature=45°C
  • Oil temperature Rise: 35°C
  • Winding Rise: 40°C
  • Tap switch: NIL(For 16 KVA to 100 KVA)
  • Type Of Winding Aluminum wound Off circuit Tap switch: +5% to -5% @ 2.5%(For 160 & 200 KVA)
Energy efficiency level 3 transformer diagram

 

level 3 Energy efficient transformer losses

 

Benefits of Higher Efficiency in Transformers

Agreeing to the DOE, the modern effectiveness levels are anticipated to decrease vitality misfortunes by an normal of 18% in low-voltage dry-type distribution transformers and by 13% in medium-voltage dry-type transformers, compared to the current TP1 efficiency levels The natural affect and reserve funds for buyers coming about from the DOE changes are positive and critical. The DOE gauges that higher vitality effectiveness levels will result in an evaluated $12.9 billion in add up to costs savings for buyers and 3.63 quadrillion BTU of energy savings over a 30-year period. As a result, around 265 million metric tons of CO2 outflows will be avoided, proportionate to the yearly GHG emissions of approximately 52 million automobiles.

 

energy efficiency level 3 transformer Toc Formula For Distribution Transformer..

  • TOC (Total Owning cost) = IC+ (A X Wi ) +(B X Wc)
  • IC = Initial cost (unit end cost without tax) of transformer as quoted by the bidder.
  • Wi  = No Load losses quoted by the bidder in Watt
    Wc  = Full load losses at 75 °C quoted by the bidder in Watt
  • A Factor = Cost of no load losses in Rs/ Watt
    B Factor = Cost of full load losses at 75 °C in Rs. / Watt

 

is 1180 energy efficiency level 3 transformer For Both Stack/Wound Core:

 

Parameters

5
KVA

10
KVA

16
KVA

25
KVA

63
KVA

100
KVA

200
KVA

500
KVA

Minimum Radial clearance of
LV Coil to Core in mm

3.5

3.5

3.5

3.5

3.5

4

4

4

Minimum radial clearance
between LV coil to HV coil in mm

11

11

11

11

11

11

11

11

Phase to phase clearance in mm between HV conductors with a provision of minimum of 2 x 1 mm press board to
cover the tie rods.

N.A.

10

10

10

10

10

10

10

Minimum electrical clearance between inside surface of the Tank and outside edge of the winding
in mm

30

30

30

30

30

30

30

30

End Insulation, Coil end to
Earth in mm

25

25

25

25

25

25

25

25

No. of Coils LV per Phase

1

1

1

1

1

1

1

1

Minimum No. of HV Coils up to 500 KVA (Cross over
winding) – for Stack core

1

4

4

4

4

4

4

4

–     Do – for Wound core

1

1

1

1

1

1

1

1

Minimum No. of axial wedges between LV and HV
winding equi -spaced around

6

6

6

6

6

8

8

8

 

energy efficiency level 3 transformer Temperature Rise

Temperature Rise

5 KVA

10 to 500 KVA

Top    oil    temperature
thermometer

rise

measured

by

30 deg.C

35 deg.C

Winding     temperature
resistance

rise

measured

by

35 deg.C

40 deg.C

 

is 1180 energy efficiency level 3 transformer Routine Tests

  1. Measurement of winding resistance (at all taps if applicable) [IS2026 (Part1)].
  2. Measurement of voltage ratio, polarity, phase sequence and vector group[IS2026(Part1)].
  3. Measurement of short-circuit impedance (principal tapping, when applicable)
  4. Load losses at rated current and normal frequency,at50 % and100 % load [IS2026(Part1)].
  5. Measurement of no-load loss and current [IS2026(Part1)].
  6. Measurement of insulation resistance [IS2026(Part1)].
  7. Induced over-voltage withstand test[IS2026 (Part3)].
  8. Separate-source voltage withstand test [IS2026(Part3)].
  9. Pressure and vacuum test(as per IS: 1180-2014).
  10. Oil leakage test(as per IS: 1180-2014).
  11. Neutral current measurement, shall not be more than 2% of full load current (CEA Guideline 2008 clause no 34.9)
  12. Oil samples (one sample per lot) to comply with IS 1866.
  13. Measurement of no load losses and magnetizing current at rated frequency and at 90%, 100%and 112.5% voltage

 

is 1180 energy efficiency level 3 transformer Percentage Impedance

Rating of Transformer in KVA

Percentage Impedance at 750C

5 KVA

4.00 %

10 KVA to 100 KVA

4.50 %

200 KVA & 500 KVA

4.75%

 

Highlighted Points For Is 1180 (Part 1) : 2014

In revised IS specification, losses for each rating for each category have been defined in three levels which are denoted by as follows;

  • a) Energy Efficiency Level 1
  • b) Energy Efficiency Level 2
  • 3) Energy Efficiency Level 3

In each level maximum losses (No Load Loss + Load Loss) at 50% load & 100% load have been specified for each rating in all categories.

a) Three phase distribution transformers upto and including 200KVA, 11KV Class

Sl. No.
Rating (KVA)
% Z
Energy Efficiency Level 3
@ 50%
@ 100%
1
16KVA
4.5%
120W
400W
2
25KVA
4.5%
175W
595W
3
63KVA
4.5%
300W
1050W
4
100KVA
4.5%
435W
1500W
5
160KVA
4.5%
570W
1700W
6
200KVA
4.5%
670W
2100W

 

b) Three phase distribution transformers Higher than 200KVA upto and including 2500KVA, 11KV Class

Sl. No.
Rating (KVA)
% Z
Energy Efficiency Level 3
@ 50%
@ 100%
1
250KVA
4.5%
920W
2700W
2
315KVA
4.5%
955W
2750W
3
400KVA
4.5%
1150W
3330W
4
500KVA
4.5%
1430W
4100W
5
630KVA
4.5%
1745W
4850W
6
1000KVA
5.0%
2620W
7000W
7
1250KVA
5.0%
3220W
8400W
8
1600KVA
6.25%
3970W
11300W
9
2000KVA
6.25%
4790W
14100W
10
2500KVA
6.25%
5900W
17500W

 

c) Single Phase distribution transformers upto and including 25KVA, 11KV Class

 

Sl. No.
Rating (KVA)
% Z
Energy Efficiency Level 3
@ 50%
@ 100%
1
5KVA
4.0%
30W
75W
2
10KVA
4.0%
55W
150W
3
16KVA
4.0%
63W
190W
4
25KVA
4.0%
95W
260W

Further to above it is also observed that IS 1180 are now also applicable for 22KV & 33KV class transformers, losses values for 22KV & 33KV class transformers shall be applicable as per below clause:

  • a) For transformers having voltage class above 11KV and upto and including 22KV, the permissible total loss value shall not exceed by 5% of the maximum total losses values mentioned in table a) & b) for three phase.
  • b) For transformers having voltage class above 22KV and upto and including 33KV, the permissible total loss value shall not exceed by 7.5% of the maximum total losses values mentioned in table a) & b) for three phase.
  • c) For transformers having voltage class above 11KV and upto and including 22KV, the permissible total loss value shall not exceed by 7.5% of the maximum total losses values mentioned in table c) for single phase.
  • d) For transformers having voltage class above 22KV and upto and including 33KV, the permissible total loss value shall not exceed by 10% of the maximum total losses values mentioned in table c) for single phase.

 

types of industrial transformer available

 

India’s Largest Star Rating Distribution Transformers with Energy Efficiency Level 3 as per IS 1180:2014 (Part I) manufacturers in india
Contact level 3 certificate in energy efficiency for domestic heating in india